IEC60601 Figure CC1 for Evaluate The Risk Degree Of V-Shaped Opening Of V-Shaped Opening Of Medical Devices
IEC60601 Figure CC1 for Evaluate The Risk Degree Of V-Shaped Opening Of V-Shaped Opening Of Medical Devices
- Model：
IEC60601 Figure CC1 for Evaluate The Risk Degree Of V-Shaped Opening Of V-Shaped Opening Of Medical Devices. IEC 60601-1 — medical electrical equipment — general requirements for basic safety and essential performance. IEC 60601-1 is the base standard for the basic safety and essential performance of medical electrical equipment; the collateral and particular standards add requirements for specific equipment types. This unit is built by Kingpo for bench use in a medical electrical safety laboratory, and it is supplied with a calibration certificate.
What it measures
- The quantities named in the applicable clause of IEC 60601-1
- Worst-case supply and load conditions, selected from the front panel or automatically
- Pass/fail against the limits entered by the operator, with the reading retained for the report
Specification
| Standard | IEC 60601-1 |
| Function | IEC60601 Figure CC1 for Evaluate The Risk Degree Of V-Shaped Opening Of V-Shaped Opening Of Medical Devices |
| Control | Programmable test sequences with stored results |
| Power supply | AC 220 V 50/60 Hz (other supplies on request) |
| Calibration | Calibration certificate supplied |
| Made by | Kingpo — built, tested and calibrated in-house |
How a test run works
- Configure the supply condition and the measuring device arrangement the clause requires.
- Connect the equipment under test, including any applied part and earth reference.
- Select or program the sequence: normal condition first, then the single-fault conditions.
- Run, capture the readings and compare them with the allowable values in the standard.
- Store or print the result set; the test report needs every condition, not just the pass.
Buying notes
Confirm three things before ordering: which edition of IEC 60601-1 your market requires, whether you need the single-fault conditions automated, and what load range your products actually present. Sending us the clause numbers you test against is usually faster than comparing model names.
Frequently asked questions
Is the unit calibrated before despatch?
Yes, and we re-calibrate on request.
Can it be supplied for 110 V?
Yes — other supply voltages and plug types are available; tell us the market.
Do you provide the test procedure?
We supply the operating procedure and, where the standard allows, the test sequence pre-programmed.
Related gauges and equipment
Other equipment in the same range:
- IEC 60601-1-Figure 34 Spark Ignition Test Apparatus
- ANSIAAMI EC12：2000(R2005) Disposable ECG Electrode Performance Tester
- IEC 60601-1 Grips And Other Handling Devices-7 Cm Strap Tester
- ISO 9360-1 Heat And Moisture Exchangers (HMEs) For Humidifying Respired Gases In Humans-Measurement Of Moisture Loss
- ISO 23328-1 Conditioning Apparatus For BSF
- Surgical Mask Tester Surface Moisture Permeability Tester Height Adjustable Manual Control
Send the standard, figure number and quantity to Kingpo technical sales for a quotation and delivery date.
Parameters of the IEC60601 Figure CC1 for Evaluate The Risk Degree Of V-Shaped Opening Of V-Shaped Opening Of Medical Devices. Test conditions and limit values come from IEC60601; the instrument is configured to run them and to record the readings.
| Standard | IEC60601 |
| Figure / clause | Figure CC1 |
| Function | IEC60601 Figure CC1 for Evaluate The Risk Degree Of V-Shaped Opening Of V-Shaped Opening Of Medical Devices |
| Control | Programmable test sequence with stored results |
| Data output | Result storage and report export |
| Power supply | AC 220 V 50/60 Hz (other supply voltages on request) |
| Scope of supply | Instrument, test leads and calibration certificate |
| Calibration | Calibration certificate supplied; re-calibration available |
| Origin | Kingpo — machined, inspected and calibrated in-house |
Custom versions, alternative materials and re-calibration are available. Send the standard, figure number and quantity for a quotation. Tell us the clause numbers you test against and we will confirm the configuration.